3.2) ProE and ProM Wildfire 3

3.2.a) Installation
The step by step installation procedure can be found here (PTC has the habit of changing the GUI at every upgrade, and I have decided to stop upgrading this step by step procedure, unless there is a real demand for it) :launch setup.exe in: P:\cdProeProMecaWildfire3\cd1
3.2.b) Configuration
Once finished installing ProE and ProM, launch config_ProE_Wildfire3.bat located in P:\ .Launch ProE and check if you have access to the LIBRARY . If you don't see the LIBRARY make sure you are connected to P:. If this is the case copy manually all the files located in P:\config\configs to C:\Program Files\proe2001\text (if asked replace the existing files). Close ProE and try opening the the LIBRARY .
The config .bat won't work under Windows Vista => copy the files manually as explained above!

3.3) ProE and ProM 2001
3.3.a) Installation
Launch the automated scripts located in P:\. For ProE: install_ProE2001.bat and for ProM: install_ProM2001.bat.
The scripted installation is OK for most users. If you want tu use pro/MECHANICA withing pro/ENGINEER you might want to do the manual installation as described below.
If the scripts don't work, use the step by step instructions ( ProE launch setup.exe in: P:\cdProeProm2001\ProE, ProM , launch setup.exe in: P:\cdProeProm2001\ProMeca)
3.3.b) Configuration
Launch the automated script locatd in P:\: config_ProE2001.bat.
Launch ProE and check if you have access to the LIBRARY . If you don't see the LIBRARY make sure you are connected to P:. If this is the case copy manually all the files located in P:\config\configs to C:\Program Files\proe2001\text (if asked replace the existing files). Close ProE and try opening the the LIBRARY .The config .bat won't work under Windows Vista => copy the files manually as explained above!